How are Engineered Wooden Floors Made?

Oak smoked & Oiled engineered wooden floor

You’ve undoubtedly seen engineered wood floors before—even if you don’t know it—but would you be able to tell them apart from solid hardwood floors? To help you get a better understanding of the difference between other types of floors and engineered wooden floors, let’s take a closer look at the process behind engineering wooden floors.

Everything You Need to Know about Engineered Wooden Floors

Engineered wood floors are simply a finished hardwood covering (called a wear layer) that is set on top of a less expensive but stronger wooden layers. These layers are all pressed together (the engineering process) to create a beautiful finish with strong qualities at a fraction of the price of solid finished hardwood floors.

The grains of the layers of wood are set in different directions to increase the strength, making them more stable than solid hardwood. After they are glued together, they also become more resistant to humidity, moisture and changes in temperature that cause expansion and contraction (which causes floors to warp, split and crack). This makes them more desirable than solid wooden floors for particular installations.

How Much Do Engineered Wood Floors Cost?

Of course, engineered wooden floors can be more expensive as the quality goes up. For instance, if the plywood backing is made of the same timber species as the finished face , the stability of the engineered wooden floor boards go up, past that of a normal plywood engineered wooden floor.. This can cause the price to jump because the stability is higher and the quality is better.

Prices of engineered wooden floor boards can also go up depending on the thickness of the top layer of veneer. Generally, the “wear layer” is between 0.6 mm and 6.5 mm, the thicker the layer, the more expensive and stronger the engineered wooden floor. A thickness of at least 2 mm is needed in any installation where refinishing is planned at any point down the line.

There are also three other factors that play into the price of engineered wooden floors, all of which have to do with the manner in which they are cut:

1. Dry Solid Sawn
2. Rotary-Peel
3. Sliced-Peel

To find out more about the pros and cons of each of these cuts of engineered wooden floors, click here engineered wooden floors right now.

Leave a Reply

Your email address will not be published. Required fields are marked *


We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.