What You Need to Know about Refinishing Engineered Wood Floors

woca oils for engineered wood floors

Before you start to refinish your engineered wooden floors, there are some factors that you need to take into consideration. Just like any home project, your engineered wood floors need special consideration before you jump in, so be sure to take note of the following:

1. Wear Layer Thickness. Before even thinking about touching your engineered wooden floors with a sander, be certain you know the wear layer of your floor. If you don’t, there’s a good possibility you could sand right through the wear layer and into the plywood base of your engineered wooden floors. As a general rule, don’t refinish any engineered wooden floors that are less than .5 mm, but in reality, the best results for refinishing engineered wood floors happen with a wear layer thickness between 1.5 mm and 2 mm.

2. Hand-Scraped Engineered Wood Floors. Engineered wooden floors that are hand-scraped will be affected by refinishing, especially those floors with light hand-scraping. You can pretty much expect to lose this type of hand-scraping altogether, though with heavier hand-scraping, you will only lose some.

3. The Bevel. You can also expect to say goodbye to some of the bevel between your boards when you refinish the engineered wooden floors. Once again, this depends on the thickness of the bevel, the thicker it is, the less bevel you will lose.

4. Stains. It is likely that your wood stain will change during the refinishing process, leaving you with two different colors of stain on your engineered wood floors. If you can, try to find the manufacturer’s exact stain to match the colors, or just try to get as close as possible.

5. Aluminum Oxide Pre-Finish. For most engineered wood floors that are pre-finished, an aluminum oxide is used by the manufacturer. You might have to go with a commercial grade water base polyurethane or a professional oil base polyurethane.

The bottom line here is that when you refinish engineered wooden floors, be prepared for some changes in appearance to take place. This is why some people opt for completely new engineered wooden floors rather than refinishing and going through any possible hassle. To outline your wooden floor options, click here engineered wood flooring right now and do things the right way.

Leave a Reply

Your email address will not be published. Required fields are marked *

x

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.