For Thermal insulation 0.5 TOG
Good floor levelling properties – can be used over damaged floors to provide a smooth laying surface.
This is a fast-track, pre fab subfloor system, specially designed for installation over all types of floor heating. This state-of-the-art floor-prep format method provides a smooth, most stable surface, onto which all types of resilient floorcoverings are to be glued directly. The twin layers of Heat-Pak panels utilise an overlap joint configuration to produce a seamless surface and prevent lines from ghosting through shiny floor finishes. Heat-Pak® creates the ideal subfloor for carpet, linoleum, vinyl, rubber, cork etc.
Is simple to install and much quicker and easier to use than traditional subfloor preparation methods, such as smoothing compound. It is also an entirely dry process, so much cleaner and requires no setting time, which allows the finished flooring to be fitted immediately. Heat-Pak® makes the installation of electric cable, mat, foil or film systems far easier. Heat-Pak® ensures that the entire heating is safely protected underneath the finished floor.
A low thermal resistance; TOG of only 0.5, enables your valuable heat energy to pass quickly and easily through to the surface for a fast warm up time and maximum comfort.
It is composed from high quality MDF. The 3 mm baseboards and 4mm top boards are coated with a special interactive contact adhesive to give a strong, permanent full surface bond. Strict quality controls during production guarantee excellent results and a trouble-free installation every time.
Easy does it – with a 3mm base and 4mm top board bound by a special interactive adhesive, it’s quick, clean and easy to install compared with traditional screeds. Smooth, stable and simply warmer – the system’s designed to create a subfloor layer over electrical underfloor heating systems for a perfect finish ready for the floor covering – with very low thermal resistance to really let heat through. The lightweight MDF material a breeze to lift and manouevre, so with its quick and easy installation you’ll really save time and effort. The double layer construction gives you excellent impact and sound insulation, making the whole room quieter. can be installed over existing hard surfaces, to save even more time during fitting. With all its time-saving benefits, ideally suited to commercial installations.